96W IP67 Waterproof Power Supply - Reliable & Quality Solutions from China Factory and Leading Suppliers
Product Specification
OUTPUT |
Voltage(DC) |
24V |
Current |
4A |
|
Power(Max.) |
96W |
|
Ripple & noise |
≤240mV |
|
Voltage tolerance |
±5% |
|
Standby power |
<0.21W |
|
INPUT |
Voltage Range |
100-240VAC |
Frequency Range |
50-60Hz |
|
ENVIROMENT |
operation Temp. |
0℃ to+40℃ |
Storage Temp. |
-20℃to+80℃ |
|
Operation HUM |
10%-90% |
|
SAFETY |
Safety Standards |
61558 |
Other |
MTBF |
>50,000 hours at 80%load and 25℃ |
Dimension |
162.0X67.0.2×32.0mm |
Specification Details
1. The range of input voltage is from 90Vac to 264Vac with a single phase.
2. Input AC Current: 2.3Amax @ 100-240Vac input & Full load
3. Inrush Current (cold start): The inrush current will not exceed 120A at 240Vac input and Max load for a cold start at 25℃
4. Average Efficiency: While input 115Vac and 230Vac, the average efficiency is more than 86.0%.The test point is at 25%, 50%, 75% and 100% of max load respectively.
5. Energy Consumption: While input 115Vac or 230Vac and the output is no load,the input power loss must be less than 0.21W.
6. Turn - on Delay Time: 3S max. @ 100 Vac to 240 Vac input & Full load
7. Hold-up Time: 5mS min. @ Full load &230Vac/50Hz input turn off at worst case
8. Capacitance Load: While input100~240Vac and capacitance load is 470uF, the adapter can turn on normally and the output is in the rated range.
9. Output Overshoot / Undershoot: 10% max. When the power on or off
10. Output Load Transient Response: the output shall not exceed 10% of the nominal output voltage, load flunctuation: from 20% to 80%, R/S: 0.5A/uS, frequency: 100Hz duration and 8mS at 80%.
11. Over Current Point Limited: 4.5-8A, The output shall hiccup when the over currents applied to the output rail, and shall be self-recovery when the fault condition is removed.
12. Short Circuit Protection: The input power shall decrease when the output rail short, the power supply shall no damage, and shall be self-recovery when the fault condition is removed.
13. Over Voltage Protection: The power supply shall protection when the output over voltage.
14. Operating Temperature and Relative Humidity: 0°C to +40°C,10%RH to 90%RH
15. Storage Temperature and Relative Humidity: -20°C to +80°C, 5%RH to 95%RH non-condensing @ Sea level shall be low 10,000 feet
16. Vibration: 10 to 300Hz sweep at a constant acceleration of 1.0G(Breadth: 3.5mm) for 1Hour for each of the perpendicular axes X, Y, Z
17. Waterproof Test: IP67 Reference standard, Maximum operation humidity is 98%. It is recommended to operate in conditions under RH 90%. The nozzle with an inner diameter of 12.5mm is used to make the distance between the test sample and the nozzle 2.5m ~ 3m, and the water flow rate is 100 L/min (6000 L/h).According to the shell surface area of the tested sample, it is 1 min per square meter (excluding the installation area) and at least 3 min. Vacuum test: vacuum suction pressure 3Kg/F (equivalent to water depth of 30 meters) for 3S with no air leakage detected.
18. Reliability Requirements: The power supply shall be burn-in at least 4 Hours under normal input and 80% rated load at 40℃ ± 5℃. The MTBF shall be at least 50,000hours at 25°C, Full load and nominal input condition.
19. Dielectric Strength(Hi-pot): Primary to Secondary: 4242VDC or 3000VAC / 5mAMax / 60second(3 seconds for mass production).
20. Leakage Current: 0.25mAmax. at 264Vac / 50Hz.
21. Insulation Resistance: 50MΩ min. at primary to secondary add 500Vdc test voltage.
Why Choose US?
- Profession: 20 Years’ R&D Innovation Capability, Offer OEM & ODM Service.
- Strong: 800 Employees Chinese Factory, 50 Professional R&D Engineer, 80 QC Members.
- Service: Competitive Price, Free Sample, 25 to 40 Working Days Lead Time. It depends on order quantity and the order time.
- Reliable: Completely certificated.
- Comprehensive: Battery Chargers, LED Drivers, External Power Supplies Desktop Type, External Power Supplies Fixed wall-plug-in type, External Power Supplies Interchangeable plug type, External Power Supplies USB Chargers, IP67 Waterproof Power Supplies, Medical Power Supplies Desktop type, Medical Power Supplies Fixed wall-plug-in type, Medical Power Supplies Interchangeable plug type, Open Frame Power Supplies, PD Charger,USB Chargers, AC cable, Power Cord, etc.
Frequently Asked Questions (FAQ)
What is the input voltage range of the power supply?
The range of input voltage is from 90Vac to 264Vac with a single phase, and the standard specification supports a range of 100-240VAC at a frequency range of 50-60Hz.
What safety protections are built into the system?
The system features Over Current Protection (limiting at 4.5-8A with auto-recovery), Short Circuit Protection (input power decreases during short, auto-recovery on removal), and Over Voltage Protection.
What is the waterproof standard for this product?
It complies with the IP67 reference standard. It is vacuum tested at a suction pressure of 3Kg/F (equivalent to 30 meters water depth) for 3 seconds with no air leakage detected.
What certifications do your power supplies hold?
Our products are fully certificated and have obtained global safety certifications including UL/CUL, TUV, GS, PSE, CE, KC, CCC, SAA, and BMSI.
What is the expected reliability and MTBF of the power supply?
The power supply has an MTBF (Mean Time Between Failures) of at least 50,000 hours at 25°C under full load and nominal input conditions, or at 80% load and 25℃ depending on the model.
Can you provide customized power supply solutions?
Yes, customized power supply solutions can be provided for customers all over the world. Our factory in Guangdong province specializes in designing and manufacturing open frame power supplies, AC-DC adapters, chargers, and transformers.